Continue this process until the meter screen indicates the coordinates have been reached for your Dish Network satellite. Again, make only one slight adjustment to the Dish Network satellite, then wait for signal meter screen guidance or inspect the signal meter screen yourself. If you do not have an assistant, you will need to move inside to view the signal meter screen after every couple of adjustments in order to gauge your progress.īegin making elevation (left/right) adjustments to the Dish Network satellite in tandem with continued elevation adjustments as directed. There is no charge for a remote control to replace. The meter screen will detect current signal strength and lead you toward pointing the Dish Network satellite to the correct coordinates in the sky above. To order a replacement or an additional remote for DISH TV, call DISH customer service at 1.888.742.0239. Your friend will report back to give you guidance on further elevation adjustments based on the Dish Network receiver's guidance. Only make one slight adjustment before allowing the digital signal meter screen on the receiver a few moments to update and gauge the changes you made in real-time. ![]() If you do not have a friend, proceed outside anyway, although the process will be more complicated.īegin making elevation (up/down) adjustments to the Dish Network satellite. Select the "Digital Signal Meter" entry from the menu and go outside to the satellite dish, leaving a friend with the Dish Network receiver. Once unplugged, count to ten and then plug it back in. Follow the power cord to the outlet or power strip it is plugged into and unplug it. If you’re looking at the back of your receiver it’s on the far left side often marked with a red tag as shown below. Turn on your Dish Network satellite receiver and your TV and allow the menu to boot up. Find the power cord coming from your DISH Network receiver. Re-attach any loose composite plugs to their ports, and also ensure that each port and plug are matched to their respective colors. Notice that there is a color-matching set of red, yellow and white composite ports both on the back or side of your TV and the back of the Dish Network satellite receiver. Each of these plug sets consists of one red, one yellow and one white plug, for a total of six plugs. ![]() This connection is accomplished thanks to the included composite cable, which is an A/V (audio/video) cable that possesses a pair of matching plug sets on each of its cable ends. Check the connection between the Dish Network satellite dish and the Dish Network satellite receiver.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |